Benefits of an Ergonomic Mouse

By Ryan Fogel,

If you spend many hours of the day in front of your computer, then you are sure to use a mouse often. Consistent use of a traditional mouse is likely to strain your wrist, causing issues such as numbness and stiffness. With the use of an ergonomic mouse, the risk of these wrist problems is greatly reduced. Here are just a few benefits to switching to an ergonomic mouse, and in turn reducing the likelihood of experiencing and injuries while mousing:

1. Prevents twisting in the wrist

When using a traditional mouse, you will often twist your wrist continuously, which results in stress to the tendons. This can possibly lead to reoccurring injuries due to stress and long-term damage. Your wrist was not meant to handle repetitive stress for the whole day. An ergonomic mouse gives you a handshake position, preventing stress and pain during your workday.

2. Less is more

Unlike the regular mouse, the ergonomic mouse requires less strength for your grip. This helps to release tension from the tendons in your wrist, resulting in less aggravation and less fatigue as you work. A vertical mouse, for example, enables you to transfer the energy from operating the mouse from the wrist to stronger muscles in the upper arms.

3. Prevents aggravation of existing pain

The existing pain you developed in your wrist, such as tendonitis as a result of using the regular traditional mouse, may be alleviated when you switch to an ergonomic mouse. Tendon damage to the wrist may result in long-term problems like arthritis. This is why an ergonomic mouse to help prevent further damages to your wrist that may lead to these life-altering conditions later in life.

4. Prevention of future injury

You don’t need to wait for the pain caused by the long-term use of a regular mouse to switch to an ergonomic model. You can quickly prevent excess stress by making sure to get an ergonomic mouse right away that is tailored to your needs.

Ergonomic mice come in several sizes and shapes to promote a neutral posture in your wrist as well as comfort. Each of these shapes relaxes your wrist by transferring the strain from the wrist to the upper arm muscles. Thus, you prevent future pain to your wrist, which may lead to lasting damage to the tendons.

Over the last couple of years, several products and design changes have been made to ensure that there is exceptional efficiency and comfort in your work. This is also true with ergonomic mice. Long-term damage to your wrist and diseases such as arthritis can be prevented with the use of proper equipment.

At Accredited Rehabilitation Consultants, we can evaluate your current workspace, find ways to make it more ergonomic, and then provide and install the necessary equipment to do so. To learn more, contact us today!

  Filed under: Ergonomics Products, Workplace Injury Reduction
  Comments: None


Avoiding a Mouse-related Musculoskeletal Injury

By Ryan Fogel,

Repetitive Stress Injury (RSI) is a kind of catch all phrase for many conditions, including:

  • Carpal Tunnel Syndrome
  • Tenosynovitis / DeQuervain’s Syndrome
  • Tendonitis
  • Thoracic Outlet Syndrome
  • Trigger Finger
  • Myofascial Pain Syndrome
  • Chronic Sprain / Strain

Repetitive Stress Injuries occur from repetitive movements involving a specific set of muscles and joints. Mechanical Onset RSI (MORSI), also known as mouse arm disease (MAD), is a mouse-related musculoskeletal injury that affects millions of people around the world and costs employers and insurers billions of dollars. As we spend increasing amounts of time at our computer workstations, we need to be aware of how the design and arrangement of our equipment can impact our chances of acquiring a mouse-related musculoskeletal injury.

How Do I Avoid a Mouse-Related Musculoskeletal Injury?

The feature photo above is an excellent example of how NOT to use your mouse. The following tips should help you avoid a mouse-related musculoskeletal injury. These same posture principles apply to other input devices (e.g., trackball, touchpad, pen, digitizing puck etc.). Postural variation is a key factor for good ergonomics. Try to regularly vary your posture when you work with a mouse, and in this way you will help to minimize the risk of ergonomic problems. Remember, the best ergonomic mice are designed to allow you to vary your posture while working with the mouse.

  1. Mouse GripHold the mouse gently when moving it over a mousing surface. Cup your hand over the mouse, almost floating, without allowing the mouse to support the weight of your arm. Gripping the mouse tightly will strain the muscles in your arm and hand, which could lead to a mouse-related musculoskeletal injury. Frequent breaks should also be taken and arms stretched to boost circulation and re-oxygenate the hand and finger muscles.
  2. Mouse from the Elbow – The human wrist was not designed for a computer mouse. Operating a mouse is awkward and becomes uncomfortable, because the wrist is turned up to 90 degrees from its most comfortable natural resting position. Any bending of the wrist, either to the side or up and down, can lead to tendon damage or other mouse-related musculoskeletal injury. To help avoid a mouse-related musculoskeletal injury, make controlled mouse movements with the entire lower arm, using your elbow as the pivot point and keep your wrist straight and neutral.
  3. Optimal Mouse Position – The most up-to-date studies show that a slightly reclined sitting posture with the hips flexed at 100 to 115 degrees is ideal if you have to sit at a desk. So, sit back in your chair, relax your arms then lift your mousing hand up, pivoting at the elbow, until your hand is just above elbow level. Your mouse should be positioned somewhere around this point. Don’t use a mouse by stretching to the desk or out to the side of a keyboard. This stresses your back by reducing the angle of your hips and increases your chance of getting a mouse-related musculoskeletal injury.
  4. Protect Your Wrist – Your wrists should never be in direct contact with any surface, including wrist rests and mouse pads. Instead, use the base of your palms to support the weight of your hands and arms in between mousing and typing to keep pressure off the sensitive carpal tunnel area in the wrist. This will help reduce the risk of a mouse-related musculoskeletal injury.
  5. Avoid Restricting Circulation – Blood circulation is responsible for the action that moves nutrients, gases and wastes to and from cells, and helps stabilize body temperature and pH to maintain harmony. When blood vessels constrict, blood does not flow properly. Many people have exposed blood vessels near the skin at the wrist, where the pulse is often taken. Any pressure in this region will disrupt circulation into the hand and this will cause constriction in those blood vessels, which can cause hands and fingertips in the mouse hand to become cold. This can lead to a mouse-related musculoskeletal injury like Carpal Tunnel Syndrome, Arthritis, Raynaud’s, DeQuervain’s, or Tendonitis.
  6. Don’t Use a Wrist Rest – Don’t use wrist rests or splints while typing, experts warn. Research has shown that using a wrist rest doubles the pressure inside the carpal tunnel. According to Professor Alan Hedge, Cornel University, the floor of the tunnel is a more flexible ligament that transmits external pressure changes directly into the carpal tunnel. Are you already suffering from Carpal Tunnel Syndrome (CTS)? One way to find out is by performing a test called “Tinel’s sign”, which simply involves tapping on the palmar surface of the wrist, which is enough to cause tingling and numbness in someone developing CTS.
  7. Avoid Restricting Arm Movement – With a softly padded wrist rest, especially one that is rounded, or a soft chair arm rest the forearm becomes “locked” into position. Mouse movements should be made using the elbow as the pivot point, not the wrist. Too much wrist movement increases intracarpal pressure, leading to a mouse-related musculoskeletal injury.
  8. Mouse Shape – Choose a mouse design that fits your hand, but is as flat as possible to reduce wrist extension. Don’t use a curved mouse. Use a larger, symmetrically shaped mouse, such as the Whale mouse or the Perfit mouse, which encourage arm rather than wrist movements or that encourage postural variety and one or two-handed use. Pen-based mice designs also allow a more comfortable grip. Some types of mouse palm support can be attached to the mouse, such as the Mouse Bean.
  9. Load sharing – If you want to load share between your right and left hands, using the mouse for some of the time with each hand, you need to choose a mouse platform that can easily be configured to the left and/or right and a symmetrical shaped mouse that can be used by either hand.

Other Input Devices

Whether you choose a different mouse design, trackball, joystick, pen, touchpad, multitouch pad, or some other input device, make sure that you position it comfortably and that your wrist stays in a neutral position when using the device to avoid a mouse-related musculoskeletal injury.

How to Position Your Mouse in Your Workspace

Right-handed and left-handed mouse users should position a flat mouse platform, 1-2″ above the keyboard and over the numeric keypad – you can easily move it out of the way if you need to access these keys. With a downward sloping mouse platform, position this close to the side of the keyboard so that you can use the mouse in a neutral wrist position. However, if you are left-handed and have a right-handed keyboard, with the numeric keypad on the right, your best bet would be to use an angle-adjustable mouse platform placed immediately to the left side of the keyboard, and position it so that your left wrist is neutral. Mouse platforms are commercially available. If you require assistance choosing a mouse platform, please call Accredited Rehabilitation Consultants.

Accredited Rehabilitation Consultants not only provides ergonomic evaluations and ergonomic consulting, we also can help you get set up with the ergonomic equipment you need to prevent costly injuries in the workplace. See our Ergonomic Equipment page for more information on how we can help you make appropriate ergonomic selections for your workplace. We have relationships with many manufacturers and will recommend the best options regarding ergonomic equipment on the market.

Call 323.930.6599 or
Contact us online

Resource:

  Filed under: Ergonomic Injury, Ergonomic Injury Prevention, Workplace Injury Reduction
  Comments: None